Kurt Introduces A Full Line Of Hydraulic Swing Clamps and Pumps

        Minneapolis, Minnesota: Kurt announces the introduction of a full line of Hydraulic Swing Clamps, Pumps and a Wireless Sensing System provided by Electrochem Solutions, Inc. for clamping and monitoring of the workpiece in a high production machining environment.

            This new Kurt product line provides a full range of Swing Clamps and accessory options for configuring the right workholding system for a single machining center or a multi-pallet cell with multiple machines. This new Kurt workholding system has been designed to increase productivity, reduce labor costs and scrap while improving part quality.

                        Kurt Swing Clamps Swing And Clamp In One Continuous Motion

              Kurt’s single cylinder Swing Clamps provide from 475 lbs to 6000 lbs clamping force with a maximum pressure of 5000 PSI. Kurt’s single cylinder design actuates both the swing and clamping cycle in one continuous motion. This design also makes the loading and unloading of parts faster and easier. Directional change of the swing clamp motion is easily made with a push/pull feature turning the clamping head left 90° or right 90°.

            Available in upper and lower flange and threaded body mounting styles for added flexibility, Kurt Swing Clamp design features include:

·         Cylinder bodies HRC 38 – 46 hardened tool steel with polished inner surfaces to      ensure long operating life up to a million cycles.

·         Pistons that are hard chromed and polished for maximum wear resistance and smooth piston operation. They are heat treated to HRC 60 – 63 to reduce abrasion and for maximum wear resistance.

·         Guide rods with guide slots that reduce clamp stress while promoting smooth operation and longer life.

·         Pins HRC 38 – 40 heat treated for extra pin strength. 

New Kurt Hydraulic Pump Has Peak 127 Cu. In. Output

            Kurt’s Hydraulic Pump is the ideal power source to use with its new Swing Clamps. The pump provides peak 127 cu. in. (.54 gal) total capacity and 75 cu. in. (.32 gal) useable capacity. Compact design for easy mounting and accessibility, the pump has a 1 HP motor (115/208-230 VAC), maximum amps 11.1 @ 5000 PSI. An external pressure relief valve is user adjustable from 500 to 5000 PSI. Internal safety relief valve is set at 5000 PSI.

Kurt Publishes NEW 72 Page Catalog Containing The Latest Workholding Products And Accessories –

 Kurt has published its NEW 2011 catalog containing 72 pages of the latest workholding products and accessories for precision workholding.

          Providing an even wider range of options, this new catalog contains the broadest offering of workholding in the industry. It’s a must reference for every manufacturer and shop using machining centers. All products are Indexed so the user can locate the workholding solution that works best for a particular application.

          Included in the catalog for the first time are these exciting new Kurt products:

          • PinLock™ mounting system for accurately positioning and clamping fixture plates. These time-saving devices add new versatility to Kurt’s line of fixture plates.

          • MaxLock™ 350 multi-axis vise with exclusive Anglock feature. Nothing else like it -- this new Kurt vise pulls parts down in the clamping area decreasing jaw deflection. It’s the ultimate 5-axis vise.

          • 12-station cluster towers. These new Kurt towers take high-density part clamping to the maximum with 12 stations for fastest machining time and minimal travel between parts.

          The new and expanded Kurt brochure contains more new product sizes and models. It has complete specifications and schematic drawings for easy reading. Application pictures are included along with timely information to help in making the best workholding choice. Kurt’s workholding experts are on call to assist with workholding questions when reviewing the new catalog. https://www.kurtworkholding.com/downloads/pdf/Kurt_Workholding.pdf

Kurt MiniLock Clamp

The Kurt MiniLock™ is a small, screw down clamp that operates

much like a precision vise. Designed to hold small parts for machining, the MiniLock provides a

low cost, easy-to-use option for rigidly clamping components on machine tables, pallets andhttp://www.kurtworkholding.com/workholding/minilock.php

trunion fixtures.

Operation of the MiniLock is similar to the original Kurt Anglock® vise design. When a

quarter turn is applied to the MiniLock screw, the split clamp jaw of the MiniLock is forced both

laterally and down, precisely clamping the part while preventing the part from lifting.

The Kurt MiniLock is very versatile. It can be used in single holding, double holding or

multiples of both single and double holding applications. By using stationary blocks or pins, two

parts can be clamped using a single MiniLock. Its low profile allows for machining complete top

surfaces of parts without having to re-clamp the part. Also, steps can be machined into the

MiniLock jaw for machining operations that require parts to be raised above the pallet or the

machine table.

MiniLocks are ideal for use in dedicated fixture setups and for palletizing small parts to be

loaded into receivers on machine tables. Through the use of a variety of locating blocks,

workstops and MiniLocks, several similar components or a part family can be located and

clamped on a single pallet.

“The MiniLock is another innovative clamping option from Kurt that fills a need where

small parts need to be machined in large quantities,” reports Steve Kane, global sales and

marketing manager for Kurt Industrial Products. “Without the size, weight or cost, MiniLocks

operate like full-fledged vises. They work well on most machining centers. They are ideal for

hard fixturing using multiple pallets so while one pallet of parts is being machined, the operator

can unload/load a second pallet.”

Manufactured to Kurt

of Ampco 18 aluminum bronze. The actuating screw is made of alloy steel. Available in four inch

and four metric hex sizes: 0.688 inch (17.476 mm), 0.875 inch (22.250 mm), 0.938 inch (23.826

mm) and 1.125 inch (28.575 mm). Hex thickness range from 0.188 inch (4.776 mm) to 0.375

inch (9.525 mm). One package contains six MiniLocks.http://www.kurtworkholding.com/workholding/minilock.php

’s high precision standards, the MiniLock clamping jaw is machined

Kurt DoubleLock HDL Series Vises

We have had some comments from customers that the metric jaw plate bolts are causing some confusion. This was originally done to hold down manufacturing costs and to provide a “Global” product.

In response to this issue Kurt is immediately adding all English versions of the HDLM4L, HDHLM4J, HDLM6J and HDHLM6J. For those versions we will drop the “M” in the part number. Until this can be accomplished internally, we will question all orders coming in and list the bodies and jaw kits separately to get the English version. Pricing will stay the same.

We sincerely apologize for any confusion this has caused.

Kurt’s New 3-In-One Jaw System Saves Vise Setup Time
For Common Angle Cuts

NEW LOWER PRICE! $375.00

Now there’s a fast and easy way to set vise jaws at any of seven popular angles. Using Kurt’s new 3-In-One Jaw System, parts can be clamped precisely at 5°, 10°, 15°, 20°, 25°, 30° and 45°.


This new and innovative Kurt 3-In-One Jaw System increases the versatility of any standard 6-inch Kurt vise. It’s a simple, bolt on jaw system with a series of preset patterns with aligning pins. The jaws hold parts precisely like conventional jaw plates but with the extra benefit of allowing aggressive machining while clamping at seven different angles.

This Kurt 3-In-One Jaw System also doubles as a workstop with the additional benefit of acting as a parallel.

Overall jaw dimensions are 6” x 1.735” x 0.725” ±0.000787” (0.01mm) Multiple pins in the system include 4 ea. 6mm x 22mm; 3 ea. 6mm x 40mm; 3 ea. 6mm x 58mm and 3 ea. 6mm x 76mm. Pin sets have a dimensional tolerance of ±0.0007 (0.018mm).

“Kurt’s new 3-In-One Jaw System is ideal for small lot sizes and prototype work,” reports Steve Kane, global sales and marketing manager for Kurt. “The jaw system is a better and more cost-effective option than building a special fixture. It adds versatility to any existing standard Kurt 6-inch vise at modest cost.”

See this and all of Kurt’s new products at IMTS 2010 at Booth W-2423, McCormick Place, Chicago, Illinois, September 13-18.

New Kurt® HDM690 Vise Has Full 9-Inch Jaw Opening – Repeatable 0.0007 Inch Clamping Accuracy

Kurt’s new HDM690 vise is the ideal vise for precision clamping very large parts for tool and die and production CNC applications.


Featuring a full 9-inch jaw opening, this new vise clamps larger parts with repeatable 0.001 inch accuracy and minimal stationary jaw deflection. Designed with a rigid stationary jaw, the vise features top-down bolting and a tall body design to reduce deflection.

High precision roller bearings and a specially hardened vise screw mechanism enhances precision clamping and smooth operation. The design distributes up to 6,000 lbs of clamping force evenly and precisely across the full jaw surface. Kurt’s AngLock® spherical segment in the moveable jaw (originated and patented by Kurt) further reduces jaw lift. The pull-type body design stabilizes stress in the vise body resulting in more accurate clamping of all types of parts.

Adding to overall vise rigidity while absorbing machining vibration, Kurt HDM 690 vises have 80,000-PSI ductile iron bodies with precision machined components. Together, these features combine for many years of trouble-free, precise clamping backed by Kurt’s exclusive Lifetime Ironclad Warranty.

Setup features of this new vise include: Stationary jaw bolts down from top. No need to remove from table to disassemble vise. Bolting the stationary from the top reduces the stress in the body and will stay flatter after assembly. Narrower vise body width allows for more vises in the work envelope. Bolts and locates directly on standard grid plates: 40mm, 50mm and 2 inch. Has quick-change movable jaw. This HD movable jaw vise platform allows for quick-change jaw carvability to hold flat odd-shaped parts.

Additional features include: uses sine keys for alignment, GroveLock® jaw and workstop included, adaptable to double-actuating hydraulic operation for use with robotics (with custom parts), available with optional grid plate and swivel base.

“The new Kurt HDM690 vise fills a need between Kurt’s D688 and 3600 vise models,” reports Steve Kane, global sales and marketing manager for Kurt Industrial Products. “It gives machine operators another Kurt option to improve productivity and machining quality at a modest investment.”

Kurt Manufacturing Appointed Exclusive Western Hemisphere

Distributor For Leader Chuck MMY MultiChuck Clamping Systems

Minneapolis, Minnesota: Kurt Manufacturing Company, Industrial Products Division, announced that it has signed an exclusive agreement with Leader Chuck Systems Ltd. of Birmingham, England to market the Leader Chuck MMY MultiChuck Concentric Clamping Systems in the United States, Canada, Mexico, Central and South America.

The announcement was made jointly by Mr. Mark Jones, managing director of Leader Chuck Systems Ltd. and Mr. Steve Kane, global sales and marketing manager for Kurt. The agreement is effective January 1, 2010 with the Leader MultiChuck MMY product line to be marketed through an exclusive Kurt distributor dealer network.

The Leader MultiChuck MMY product line consists of manual self-centering static workholding for machining centers, milling machines and grinders. These products integrate with Kurt’s high density workholding towers and other devices to provide the ultimate in high productivity and high precision workholding.

“Adding the Leader MultiChuck MMY System to Kurt’s high density workholding offerings gives our customers more options in designing the highest productivity workholding for their machines,” stated Mr. Kane for Kurt. “Our vise customers are looking for ways to expand their machine output and Leader MultiChuck MMY products have a proven track record of award-winning performance for many years throughout the United Kingdom and Europe.”

Mr. Jones reported, “Like Kurt workholding in U.S. industry, Leader Chuck is a very successful brand for over 50 years in European industry. We are extremely pleased to be a partner with Kurt to bring to manufacturers innovative workholding options for both new and existing machine setups.”

First introduced in 1960, Kurt vises are the workholding leader with more than 500,000 vises sold during that period. Kurt offers a full line of single and multiple station vises and towers and was the first vise manufacturer to offer a Lifetime Ironclad Warranty on the products it manufactures.

Kurt workholding products include multiple station CNC vises, 5-axis vises, rotary table workholding for VMC’s, plus a full line of tombstones for achieving maximum high density workholding and accessories to complement every workholding setup. Kurt is the exclusive worldwide distributor of NEMI vacuum workholding. Kurt also provides a full line of automated and manual gaging systems and is a Fanuc integrator for automation.